                             Mixermap for Cubase VST - PC format          
Created by Dorian May                              
File name: MRRack01-16.mix
Module: Ensoniq MR Rack
Midi Channel:  1-16 respectfully for MR Rack performance parts 1-16
System exclusive (Unit #) Na (uses RPN's NRPN's and control change numbers)
------------------------------------------------------------------------------
On the MR Rack, each performance part may be set to any one of 16 midi channels.
For this map, part #1 on your MR Rack should be set fo midi channel #1, part #2 set 
for midi channel #2 etc. 
These 16 mixermaps allows you to easily and quickly change/adjust all the performance 
parameters that are adjustable through RPN's NRPN's and control change numbers, with 
the exception being sound and bank changes, (which can easily be done through Cubases 
inspector window) and Pitch tables.
There are sixteen total mixermaps, one for each part, thereby accounting for all 16 
parts/channels.
------------------------------------------------------------------------------                 												Additional Notes and Instructions 
Some of the sliders seem to not register the proper setting if they are moved rapidly. 
If something doesn't quite seem to register properly, try moving the slider slower. 
This problem seems  to only occur with a few of the sliders/controls. This seem to be 
caused by the MR Racks Midi Implementation as I have not found this to be the case on 
other modules and mixermaps. 
System exclusive mixermaps for the MR Rack/MR Keyboards are not possible with the 
current version of Cubase VST (3.52) as the system exclusive strings for these 
keyboards/modules are 28 pairs of digit. This is more than cubase currently will allow.

I can be contacted by email:  worbaz@pe.net